Our Fees
You are about to make the largest investment in your life, should you use the inspector who charges the least? Think about it, we invest in ourselves for our customers through training, continuing education, state-of-the-art tools, proper certifications, and insurance. Because of this, I’m certain you can find a cheaper inspector, but is that the wise choice?
Home Inspections
| Typical Home Inspections (buyers) | |
| Up to 2500 sq. ft. | $300 |
| 2501-3500 sq. ft. | $340 |
| Over 3501 sq. ft. | $340 + $0.10 per sq. ft. overage |
| Move In Certified Inspections (sellers) | |
| Up to 2500 sq. ft. | $300 |
| 2501-3500 sq. ft. | $340 |
| Over 3501 sq. ft. | $340 + $0.10 per sq. ft. overage |
| New Construction Inspections | |
| Phase Inspections | $75 each |
| (foundation/rough framing, pre-drywall mechanical, seal-in [exterior] , pre-completion punch-list, and final walk-thru) | |
| New Home Inspection (complete) | |
| Up to 2500 sq. ft. | $300 |
| 2501-3500 sq. ft. | $340 |
| 3501 + sq. ft. | $340 + $0.10 per sq. ft. overage |
Other Services
| Synthetic Stucco (EIFS) Survey | |
| In conjunction with home inspection | $100 (additional) |
| Independent Survey | $150 + $85 per hour (1 hr. minimum) |
| Single Item Inspections | |
| Single Item Inspections | $125 + hourly rate ($125 minimum) |
| (This type of inspection is commonly requested by homeowners concerned with specific concerns, i.e., cracks in walls, moisture intrusion, etc.) | |
Ancillary Services
| Radon Testing | |
| With Home Inspection | $100 |
| Individual Test | $125 |
| Infrared Survey | |
| Electrical Scan (main panel) | $25 |
| Insulation Scan (Quality) | $45 |
| Full Service Scan (w/ Home Insp.) | $150 |
| Full Service Scan (w/o Home Insp.) | $225 |
| Elevation Evaluation | |
| Floor Level (Water Level Scan) | $25 (w/ Home Inspection) |
| Floor Level (Water Level Scan) | $125 (w/o Home Inspection) |
| Indoor Air Quality Sampling (IAQ) {Most Common MOLD Testing} | |
| IAQ Sampling | $150 (includes 2 samples, one in suspect area, one outside [control sample for comparison]) |
| IAQ (additional samples) | $75 each |
| Mold Swab (For Identification only) | $75 each |
| Water Testing | |
| C/B (Chemical & Bacteria) | $150 |
| (Bacteria [Total Coliform, E Coli], Nitrate, Nitrite, Total Nitrate/Nitrite, Iron, and Turbidity) | |
| C/B/L (chemical, bacteria, & lead) | $210 |
| (Bacteria (Total Coliform, E Coli), Lead, Nitrate, Nitrite, Total Nitrate/Nitrite, PH, Iron, and Turbidity) | |
| Complete Water Analysis | $300 |
| Alkalinity, Bacteria (Total Coliform, E Coli), Nitrate, Nitrite, Clarity, Chlorine, Color, Copper, Hardness, Iron, Lead, Nitrate, Nitrite, Total Nitrate/Nitrite, PH (Acidity) | |
| Septic System Testing | |
| Septic Dye Test | $75 |
| (Dye is introduced into the septic via the interior Plumbing fixtures, to determine breaks to the outlet, And seepage from the leach fields. If permitting information Is desired, please contact the county sanitarian.) | |
